Notizie

Optics Ready adapter plates for Glock gen.6 [aluminium]

Optics Ready piastre adattatrici per Glock gen.6 [alluminio]

Non è passato molto tempo da quando abbiamo scritto che ora è possibile acquistare una piastra adattatrice per i modelli Glock gen.6 che consente di installare red dot Aimpoint Acro...

2 luglio 2026

Piastre adattatrici Optics Ready per Beretta M9A4, Beretta 92X e 92X RDO di nuovo disponibili
Questo è tutto per oggi: abbiamo appena riassortito le popolari piastra adattatrice per i modelli Beretta optics ready più richiesti. Puoi trovarla qui. È compatibile con questi modelli optics ready:...
22 maggio 2025
Shield OMSsc, Shield RMSc footprint
Il più compatto red dot SubCompact: Shield OMSsc
Pistole con otturatore optics ready predisposto per ospitare lo standard di impronta Shield RMSc stanno diventando sempre più popolari. Anche se personalmente preferisco che il produttore mi lasci un po'...
19 maggio 2025
Adjustable sights, CoWitness sights, Sights, Walther PDP
Mire per Walther PDP: Alte per Co-Witness, o Basse?
Ci sono due strade da seguire quando si parla di mire e di qualsiasi modello Walther PDP: Mire alte che permettono il CoWitness con il red dot, oppure Mire basse...
18 maggio 2025
508T, 509T, comparison, features, Holosun, Holosun 508T, Holosun 509T, unboxing
Holosun 508T vs 509T: Confronto, Caratteristiche e Installazione
Due dei modelli Holosun più distintivi, rispetto agli altri modelli, sono Holosun 508T e Holosun 509T. Entrambi sono rivolti a tiratori che cercano prestazioni robuste e versatilità. In questo articolo...
27 marzo 2025
Confronto: Vector Optics Frenzy-S 1x17x24 MIC, MOS & SAS
In questo articolo analizzeremo le differenze tra 3 red dot Vector Optics. Confronteremo Vector Optics Frenzy-S 1x17x24 MIC Vector Optics Frenzy-S 1x17x24 MOS Vector Optics Frenzy-S 1x17x24 SAS Cosa hanno...
12 gennaio 2025
Vortex Defender CCW: Manuale rapido, funzioni e contenuto della confezione
In questo articolo esaminerò il nuovo Vortex Defender CCW. Inizio con l’unboxing, ti indico quale sia l’impronta, quali sono le caratteristiche principali; poi approfondisco come utilizzare questo red dot. Cosa...
9 novembre 2024
Holosun EPS & EPS Carry: caratteristiche, manuale e confronto
In questo articolo confronterò Holosun EPS e Holosun EPS Carry. Esaminerò anche le caratteristiche che entrambe queste ottiche offrono e ti mostrerò un rapido manuale su come utilizzare entrambi i...
9 agosto 2024
Holosun 507C & 407C: confronto e differenze, & manuale completo
In questo video confronterò due red dot popolari di Holosun: Holosun 507C e Holosun 407C. Ti mostrerò anche un manuale su come utilizzarli entrambi. Entrambi i modelli Holosun: 507C così...
31 luglio 2024
Holosun 507Comp: Manuale rapido, funzioni e contenuto della confezione
Diamo un'occhiata veloce al nuovo Holosun 507Comp. È identico all'Holosun 507Comp Green, tranne per il colore del dot e del reticolo. Holosun 507Comp utilizza lo standard di impronta Trijicon RMR....
25 luglio 2024
Holosun SCS CZ P-10: cosa c'è dentro la scatola
Finalmente abbiamo messo le mani sul nuovo Holosun SCS CZ P-10. Ecco come si presenta e cosa troverai all'interno della confezione. Cosa c'è nella confezione Nella confezione troverai quanto segue:...
15 giugno 2024
Piastra ottica con impronta Holosun K-series finalmente disponibile per CZ Shadow 2 OR & Compact
Abbiamo finalmente ricevuto a magazzino le piastre che possono ospitare red dot Holosun K-series [elencati sotto] sulla tua CZ Shadow 2 optics ready e CZ Shadow 2 Compact. Grazie a...
1 giugno 2024

Great experience

Great experience. Fantastic service after the sale.

Beretta PX4 [incl. Storm & Storm Inox] red dot mount | type A [RMSc, DPP, Docter footprint]

Plaque pour Vector Frenzy/Shadow2

Ma Cde a été traité très rapidement et je l’ai reçue tout aussi rapidement. Vous êtes au TOP. La plaque est pour un Vector Frenzy SCRD-79 monté sur Shadow 2.
Très bien,
SF

CZ Shadow 2 Optics Ready plate | Trijicon RMR footprint

Plate was a exact fit for the Beretta apx A1

Plate was a exact fit for the Beretta apx A1. Took a couple minutes to determine which screws to should use. 5 star rating

Beretta [APX A1 & APX RDO] Optics Ready plate | type F [RMSc, DPP, Docter footprint]

very good replacement sight for my jerico

very good replacement sight for my jerico. Need to be file a bit to fit in the slot.

Tanfoglio [Force, Combat & Compact], EAA Witness, IWI Jericho adjustable rear sight | white dots

Perfect fit

Perfect fit,

CZ Shadow 2 Optics Ready plate | Shield RMSc & Holosun K-series footprint

Fits perfectly, fiber rods are very bright,

Fits perfectly, fiber rods are very bright, installation easy

Springfield [XD,XDM] & HS Produkt [XDM, HS-9, SF19] adjustable sights | fiber optic

Great value for money

Great value for money and a big improvement from the early osight models.

Great!

They work great! Much better than factory!

Ruger P91 - P97 adjustable sights | fiber optic

Beware of thread locker - great experience

Installed this on my 92xi. Great product, however there is far too much solid thread locker on the bolts from the factory. So much so that both bolt heads snapped off during assembly. The only reason I am rating five stars is because Optics Spot support was incredibly helpful and prompt in resolving the issue on Beretta's behalf. Thank you Optics Spot. If not for the support staff I would be very unhappy, such an oversight is unacceptable from a premium brand.

Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | Trijicon RMR footprint

Much better plate and screws then Beretta's offering.

The customer service was exceptional in helping me decide which company to order this plate from. Beretta answered my call, but had no solution for their inferior, soft screws. After 500 years I would think they could have solved such an easy problem, The plate arrived a few days earlier then originally scheduled. The plate fit the Beretta APX A1 RDO perfectly. The plate was rugged and the screws supplied were much better then the soft junk screws that Beretta supplies with their plate.

Beretta [APX A1 & APX RDO] Optics Ready plate | Shield RMSc footprint

Super Sights

Hat bei mir die werkseitigen Suppressor-Height-Sights ersetzt, die waren mir zu hoch. Jetzt zusammen mit dem Frenzy SRCD-82 für mich perfektes Zielbild. Verpackung war nur ein Tütchen statt OVP, etwas seltsam. Sonst aber alles ok, bin super zufrieden. Danke Optics Spot:)

CZ P-10 Optics Ready low sights | fiber optic

Fits after filing

A genuine, high-quality product. The rear sight mount is too wide. I had to have it professionally filed down. After filing, it fits the rear sight. After that, installing the collimator is a simple matter. The communication with the store is excellent. We reached a fantastic agreement. Thank you very much for the good and friendly communication. I recommend this store and the products it offers.

1911 [Rail Gun Cut] red dot mount | Trijicon RMR footprint

Optic mount for PPQ M2

Fit like a glove

Walther [PPQ, P99, Creed, PPX & PPS] red dot mount | type S [RMSc, DPP, K-series footprint]

Perfect fit and great

Perfect fit and great quality

Ich bin sehr zufrieden mit dem Osight C

Ich bin sehr zufrieden mit dem Osight C. Das Absehen ist klar und superschnell im Ziel. Der Lieferumfang ist super. Passende Schrauben für alle möglichen Montageplatten sind dabei. Ich habe jetzt 2 Pistolen mit der Optik ausgestattet plus die zugehörigen Wechselsysteme. Für meinen S&W 686 plane ich das ebenso. Die Augen erkennen Kimme und Korn nicht mehr so gut. Die Gleitsichtbrille macht es nicht leichter. Mit dem Osight C bin ich wieder treffsicher im Ziel. Nun macht mir Kurzwaffe auch wieder Spaß.

Excellent product at a great price.

The plate is perfect, solid, and fits perfectly with the OR slide of the CZ Shadow 2. Unlike the same item produced by a well-known Italian manufacturer, it does not require dots to be inserted for coupling with the red dot because they are already part of the structure. The price is also significantly more competitive and shipping times are also reasonable.

CZ Shadow 2 Optics Ready plate | Leupold DPP footprint

Perfect fit, solid mount

Perfect fit, solid mount. Easy to work with

1911 .22 LR [GSG Cut] red dot mount | Shield RMSc footprint

Worked

Worked perfectly

Bul Sas II [UR & SL] red dot mount | type B [RMR & RTS footprint]

Mit Osight C ist jeder Schuss in der mitte

Ich bin sehr zu frieden und sieht auch noch sehr schön aus pass perfekt zur meine Waffe

CZ Target

Plate worked great so far. You’ll probably need an angled shim to zero in your red dot. Seems to be common with CZ.

CZ TS 2, CZ Shadow 2 Target red dot mount | Trijicon RMR footprint

Sro mount

This mounts is as described. Came with all the screws needed to mount on the slide and to mount the optic. Took about 2 weeks to get to me after submitting the order. Was shipped from the Netherlands. There were no additional fees ( tariff, customs or tax) up arrival.

Works great and fits nice

Beretta [92X, 92XI, 92 GTS, 92X RDO, M9A4] Optics Ready plate | type B [RMR & RTS footprint]

Did not realize “in stock” meant in stock in Europe, but delivery was fine and great fit on bun.

Great quality perfect fit

Git Great

Its made by Beretta. What more can I say.

Notizie

Optics Ready piastre adattatrici per Glock gen.6 [alluminio]

Piastre adattatrici Optics Ready per Beretta M9A4, Beretta 92X e 92X RDO di nuovo disponibili

Il più compatto red dot SubCompact: Shield OMSsc

Mire per Walther PDP: Alte per Co-Witness, o Basse?

Holosun 508T vs 509T: Confronto, Caratteristiche e Installazione

Confronto: Vector Optics Frenzy-S 1x17x24 MIC, MOS & SAS

Vortex Defender CCW: Manuale rapido, funzioni e contenuto della confezione

Holosun EPS & EPS Carry: caratteristiche, manuale e confronto

Holosun 507C & 407C: confronto e differenze, & manuale completo

Holosun 507Comp: Manuale rapido, funzioni e contenuto della confezione

Holosun SCS CZ P-10: cosa c'è dentro la scatola

Piastra ottica con impronta Holosun K-series finalmente disponibile per CZ Shadow 2 OR & Compact

Link del footer

Scegli opzioni

Let customers speak for us