Optics ready plates for Glock 17 ORS [gen 6]

This collection contains optic plates for the Glock 17 gen 6. The gen 6 slide uses the Glock ORS (Optic Ready System), a new optic cut that replaces the MOS of gen 4 and gen 5. MOS plates do not fit it, so you need a plate made for ORS. The plate goes into the factory optic cut and takes the red dot on top. Every plate is made for one footprint, so you choose it by the footprint of your red dot. The same plates fit the Glock 19, Glock 45 and Glock 49 gen 6, see Optics ready plates for Glock 19 ORS [gen 6] and Optics ready plates for other Glock ORS models [gen 6].

Footprints for the Glock 17 ORS

• Trijicon RMR: a plate from 2BME.
• Shield RMSc: a plate from 2BME.
• Holosun K-series: a plate from Holosun.
• Leupold DPP: a plate from 2BME.
• Aimpoint Acro: a plate from 2BME.

Material

2BME and Holosun make these plates from aluminium.

Installation

Remove the cover plate from the optic cut, put the plate in and screw the red dot onto it. Use threadlocker on every screw. No milling and no gunsmith are needed.

All plates at a glance

Which red dot for which footprint

• Trijicon RMR: for example the Holosun 407C, 507C and 508T, Olight Osight and Vector Optics Frenzy-X. See Red dots with Trijicon RMR footprint.
• Shield RMSc: Shield red dots, the Holosun EPS Core, Olight Osight K, S and SE and Vector Optics Frenzy-S. See Red dots with Shield RMSc footprint.
• Holosun K-series: the Holosun 407K and 507K, EPS Carry and SCS Carry. See Red dots with Holosun K-series footprint.
• Leupold DPP: for example the Holosun SCS 320, Olight Osight SE DPP and Vortex Defender ST and XL. See Red dots with Leupold DPP footprint.
• Aimpoint Acro: enclosed red dots such as the Steiner MPS. See Red dots with Aimpoint Acro footprint.

For the Glock 17 gen 4 and gen 5 with MOS, see Optics ready plates for Glock 17 MOS [gen 4/5]. For iron sights that co-witness with a red dot, see Sights for Glock 17. For all plates of this brand, see Optics ready plates for Glock models.

Frequently asked questions

How do I know if my Glock 17 is gen 6?

Glock marks the generation on the slide, for example "Gen6". The gen 6 came out in January 2026. If your Glock 17 has an optic cut and is gen 4 or gen 5, it uses MOS and you need a plate from Optics ready plates for Glock 17 MOS [gen 4/5].

Do my old MOS plates fit the gen 6?

No. The ORS cut of the gen 6 is new and MOS plates do not fit it.

Can I install an optic plate on my Glock 17 gen 6 at home?

Yes. You need no gunsmith and no milling.

1. Remove the cover plate from the optic cut.
2. Screw the optic plate into the cut.
3. Screw the red dot onto the plate.

Put a drop of threadlocker on every screw.

Which red dots will fit my Glock 17 gen 6?

It depends on the plate you choose. For the Glock 17 ORS we have plates for the Trijicon RMR, Shield RMSc, Holosun K-series, Leupold DPP and Aimpoint Acro footprints. Choose your red dot, find its footprint in the specifications and take the plate with the same footprint.